1726 products
1-component gun foam 750 ml B2 champagne without disposable gloves without disposable gloves tin TECWERK
Construction material class B2 according to DIN 4102-1 · Single-component, ready to use, self-expanding rigid polyurethane foam with very good thermal insulation and excellent dimensional stability · Suitable for assembly according to GEG, DIN 4108-7 and RAL (Mo 01, ift Rosenheim) · Exact dosage by using with an installation gun · For filling voids with foam and for insulating window and door frames, window sills · Adheres to almost all substrates, except for PE, PP, PTFE, silicone · Resistant to a large number of solvents, paints, chemicals, oil and petrol · Ageing resistant · Not UV-resistant · Not suitable for continuous use under water · Foam yield: Up to 45 litres · Thermal resistance: -40 °C to +90 °C · Processing temperature: Contact surface and environment +5 °C to +35 °C / can +5 °C to +30 °C · Silicone-free
1-component gun foam XXL 500 ml B2 grey without disposable gloves without disposable gloves tin TECWERK
Construction material class B2 according to DIN 4102-1 · Single-component, ready to use, self-expanding rigid polyurethane foam with XXL foam yield - up to 50 % higher yield than a conventional 500 ml can · Very low emissions – EC1 PLUS licensed · Suitable for assembly according to GEG, DIN 4108-7 and RAL (Mo 01, ift Rosenheim) · For filling voids with foam and for insulating window and door frames, window sills · Adheres to almost all substrates, except for PE, PP, PTFE, silicone · Resistant to a large number of solvents, paints, chemicals, oil and petrol · Ageing resistant · Not UV-resistant · Not suitable for continuous use under water · Foam yield: Up to 42 litres · Thermal resistance: -40 °C to +90 °C · Processing temperature: Contact surface and environment +5 °C to +35 °C / can +5 °C to +30 °C · Silicone-free
1-component hybrid polymer cartridge TECWERK
MS polymer-based · Remains flexible with high strength and can therefore compensate for dynamic loads such as impact and vibrations · Resistant to weathering, UV radiation, water, chlorine, etc. · Can be used without a primer in most cases · For use in machine and transmission construction, engines and the electrical industry, mining, the marine industry, the automotive sector, the food industry, etc. · For bonding sheet metal, rubber, wood and plastic, for sealing, seam sealing, repairs, etc. · Can be painted and varnished over, can be used wet on wet · Free from isocyanate and silicone · Temperature-resistant from −40 °C to +100 °C
1-component installation foam B2 champagne with disposable gloves with disposable gloves tin TECWERK
Construction material class B2 according to DIN 4102-1 · Single-component, ready to use, self-expanding rigid polyurethane foam with very good thermal insulation and excellent filling volume · For filling voids with foam and for insulating window and door frames, window sills · Adheres to almost all substrates, except for PE, PP, PTFE, silicone · Resistant to a large number of solvents, paints, chemicals, oil and petrol · Ageing resistant · Not UV-resistant · Not suitable for continuous use under water · Foam yield: 500 ml can up to 25 litre / 750 ml can up to 37 litres · Thermal resistance: -40 °C to +90 °C · Processing temperature: Contact surface and environment +5 °C to +35 °C / can +5 °C to +30 °C · Silicone-free
1-component installation gun Lite metal f.1comp PU gun foam TECWERK
Robust metal gun with rubberised handle · Offset gun tube for high stability · Easily adjusted using the good grip brass adjusting screw · For applying 1-component PU gun-applied expanding foam
1-component installation gun professional metal f.1comp PU gun foam TECWERK
High-quality professional type for heavy-duty use on construction sites · Metal · Complete non-stick coating · Can be adjusted easily and precisely · Ergonomic handle and trigger for optimum hold · For applying 1-component PU gun-applied expanding foam
2-component epoxy adhesive colourless TECWERK
Universally usable · Bonds metal, wood, plastic, stone and ceramic · Weather-resistant · Achieves very high strength · Remains tough and flexible and can therefore ensure lasting strength when subjected to impacts and vibrations · Can be applied in the electrical and electronics industries, mechanical engineering, metalworking, car assembly, plastics processing, model making, furniture industry and many more · Tensile shear strength >10 N/mm² · Gap filling capacity up to 3 mm · Fixture time 10 to 12 minutes (depending on temperature) · Final curing after 24 h · Temperature-resistant -40 °C to +80 °C · Do not use if outdoor temperature is below +5 °C · Mixing nozzle included in the scope of supply The applicator gun, article no. 4000 356 225, is required to use the 50 g cartridge
2-component epoxy liquid metal 25 g twin syringe TECWERK
Repairs incorrectly drilled holes, cracks and broken threads in metal, steel, iron, cast parts, wood, stone, glass, ceramic and many hard plastics · Can be used in materials handling equipment, vehicle construction, container construction, electro-technology and many other branches of industry · Machinable after approx. 30 min., parts can be ground, milled, drilled and painted over · Gap filling capacity 0.4 mm · Handling strength after 15 min. · Final strength after 24 h · Temperature-resistant up to +120 °C · Do not use below +5 °C outdoor temperature!
near you for high-quality productsand excellent service!