TECWERK
Convincing quality and product variety!

2-component high-performance adhesive milky TECWERK

For permanently bonding metal, stone, wood, ceramic and hard plastics · Achieves higher strengths with little or no surface treatment · Weather-resistant · Can be used in materials handling equipment, vehicle construction, container construction, electro-technology and many other branches of industry · Tensile shear strength up to 27 N/mm² · Gap filling capacity of 1–10 mm · Handling strength after 60 min. (depending on temperature) · Final curing after 12 h · Temperature-resistant up to +120 °C · Do not use if outdoor temperature is below +5 °C· Mixing nozzle included in the scope of supply The applicator gun, article no. 4000 356 225, is required to use the 50 g cartridge.

2-component installation foam 400 ml B2 light-green with disposable gloves with disposable gloves tin TECWERK

Construction material class B2 according to DIN 4102-1 · Two-component, ready to use, self-expanding polyurethane fast acting foam with excellent dimensional stability · Hardens independently of humidity · Can be cut after only 13 minutes · Very low emissions - EC1 PLUS licensed · For the installation and insulation of door frames, wooden door linings and window elements according to GEG, DIN 4108-7 and RAL assembly guidelines · Installation of DIN-tested window sills and stairway steps, for the setting of bathtub and shower tray supports, foaming of difficult to access and poorly ventilated cavities · Adheres to almost all substrates, except for PE, PP, PTFE, silicone · Resistant to a large number of solvents, paints, chemicals, oil and petrol · Ageing resistant · Not UV-resistant · Not suitable for continuous use under water · Foam yield: Up to 9.3 litres · Can contents sufficient for up to 2 door frames · Thermal resistance: -40 °C to +90 °C · Processing temperature: Contact surface and environment +5 °C to +35 °C / can +5 °C to +30 °C · Silicone-free

Abrasive mat TECWERK

Coated on two sides · On foam support that adapts itself to the workpiece · The special shape also allows very difficult to access areas such as profiles, edges, corners and curves to be accessed · Suitable for ground wood, intermediate varnish sanding, plastic sanding, metal grinding, etc.

Abrasive paper for paint/metal SiC TECWERK

Silicon carbide · Water resistant paper pad · Evenly distributed · Good adhesion of the abrasive particles on the support · For grinding paint, varnish and plastic · Especially suitable for the car repair industry · Single sheets · Dimensions: 280 x 230 mm

Abrasive paper roll for wood/paint corundum TECWERK

Corundum · Fully synthetic resin-bonded · For wood and paint abrasion · For the highest grinding requirements · 50 m roll

Abrasive paper TECWERK

Corundum · Finishing paper · Glue-bonded abrasive paper · Half open dispersal · Good grinding performance · Numerous applications for wood, metal, paint and varnish · Single sheets · Dimensions: 280 x 230 mm

Abrasive sponge TECWERK

Coated on four sides · On foam support that adapts itself to the workpiece · Suitable for ground wood, intermediate varnish sanding, plastic sanding, metal grinding, etc.

Acetone TECWERK

For pre-cleaning and degreasing all kinds of parts · Also particularly suitable for bonding acrylic glass and many plastics · Density: 0.790 · For degreasing and pre-cleaning · For thinning combination nitrocellulose lacquers and adhesives