Socket set/tool case 131-part with combination spanners AF 4-32 + 8-19 mm TECWERK

6.3 mm (1/4″) and 12.5 mm (1/2″) square drive · Socket bits and operating elements made of chromium-vanadium steel · Socket bits with chromium-vanadium steel base and phosphate-coated special steel blades · Lever-action reversible ratchets with 2-component handle and socket-locking function with push-button release Bottom contents: 6.3 mm (1/4″) square drive 1 lever-action reversible ratchet, 18° backswing angle 1 hexagonal socket bit each in AF 4 / 5 / 5.5 / 6 / 7 / 8 / 9 / 10 / 11 / 12 / 13 mm 1 deep hexagonal socket bit each in AF 6 / 7 / 8 / 10 mm 1 socket bit each for screws with Internal TORX® profile in sizes T 15 / T 20 / T 25 / T 30 1 socket bit each for screws with External TORX® profile in AF E 4 / E 5 / E 6 / E 8 1 socket bit each for screws with hexagon socket profile in sizes 3 / 4 / 5 / 6 mm 1 socket bit each for slotted head screws in 4.0 x 0.8 / 5.5 x 1.0 mm 1 socket bit each for cross-head (PH) screws in sizes 1 / 2 1 socket bit each for cross-head (PZ) screws in sizes 1 / 2 1 of each extension size 75 / 150 mm 1 sliding collar for extension 1 universal joint 1 handle with 6.3 mm (1/4″) square drive 12.5 mm (1/2″) square drive 1 lever-action reversible ratchet, 10° backswing angle 1 hexagonal socket bit each in AF 10 / 11 / 12 / 13 / 14 / 15 / 16 / 17 / 18 / 19 / 20 / 21 / 22 / 24 / 27 / 30 / 32 mm 1 deep hexagonal socket bit each in AF 13 / 17 / 19 mm 1 socket bit each for screws with External TORX® profile in AF E 10 / E 12 / E 14 / E 18 1 of each extension size 125 / 250 mm 1 sliding collar for extension 1 universal joint 1 socket bit each for screws with hexagon socket profile in sizes 7 / 8 / 10 mm (length 100 mm) 1 socket bit each for screws with Internal TORX® profile in sizes T 40 / T 45 / T 50 / T 55 1 socket bit each for sparking plugs, AF 16 / 21 mm 1 combination spanner set, 8-part (8–19 mm, see table for type) Top contents: 1 water pump pliers, 240 mm 1 universal pliers, 180 mm, 1 side cutter, 160 mm 1 Cross peen hammer (300 g) 1 craft knife, 1 junior hacksaw, 240 mm 1 voltage tester 1 screwdriver each for slotted head screws in 5.5 x 125 / 6.5 x 150 mm 1 screwdriver each for cross-head (PH) screws in sizes 1 x 80 / 2 x 100 mm Bit assortment 1 bit holder with magnet and quick-change chuck 1 bit each for slotted head screws in sizes 3 / 4 / 5 / 6 mm 1 bit each for cross-head (PH) screws in sizes 1 / 3 2 bits for cross-head (PH) screws in size 2 1 bit each for cross-head (PZ) screws in sizes 1 / 3 2 bits for cross-head (PZ) screws in size 2 1 bit each for screws with Internal TORX® profile in sizes T 10 / T 15 / T 20 / T 25 / T 27 / T 30 / T 40 1 bit with bore each for screws with internal pin-in TORX® profile with locking pin in sizes T 10 / T 15 / T 20 / T 25 / T 27 / T 30 / T 40 1 bit each for screws with hexagon socket profile in sizes 3 / 4 / 5 / 6 mm 1 adapter, 6.3 mm (1/4″) external square to 6.3 mm (1/4″) hexagon head for driving socket bits with power tools (All bits approx. 25 mm long) Adapter 1 adapter, 6.3 mm (1/4″) internal square to 6.3 mm (1/4″) hexagon socket For driving bits with a ratchet 1 adapter, 6.3 mm (1/4″) external square to 6.3 mm (1/4″) hexagon head For driving socket bits with power tools (conventional cordless screwdriver) 1 adapter, 12.5 mm (1/2″) external square to 6.3 mm (1/4″) hexagon head For driving socket bits with power tools (conventional cordless screwdriver)

Spacer width 66 x height 30 x depth 386 mm TECWERK

Milled foam insert · Serves as a filler for the use of TECWERK tool bits · Suitable for the TECWERK tool trolley, article no. 2000 871 505 Small parts such as screws or similar items can be stored in the existing cut-out. · Serves for the optimum and practical use of the width of drawer.

Tool assortment Universal 44-part L-BOXX TECWERK

In TECWERK L-BOXX® for universal application Comes with high-quality industrial/trade tools Practical two-coloured insert for easy tool completeness check Comprising: 1 wooden folding rule, length 2 m, white, moisture-resistant 1 screwdriver set, 6-part, slot/PH (1 screwdriver each for slotted head screws in 3.5 x 100 / 4.5 x 125 / 5.5 x 125 / 6.5 x 150 mm, 1 screwdriver each for cross-head (PH) screws in 1 x 80 mm / 2 x 100 mm) 1 voltage tester 120–250 V AC, width 3.0 mm, length 65 mm 1 pocket retracting tape measure, length 5 m, width 19 mm, yellow, self-locking 1 ratchet combination spanner, AF 8 mm, length 136 mm 1 ratchet combination spanner, AF 9 mm, length 143 mm 1 ratchet combination spanner, AF 10 mm, length 160 mm 1 ratchet combination spanner, AF 11 mm, length 168 mm 1 ratchet combination spanner, AF 12 mm, length 174 mm 1 ratchet combination spanner, AF 13 mm, length 180 mm 1 ratchet combination spanner, AF 17 mm, length 233 mm 1 ratchet combination spanner, AF 19 mm, length 250 mm 1 ratchet combination spanner, AF 22 mm, length 285 mm 1 screwdriver set, 6-part (T 10 / T 15 / T 20 / T 25 / T 30 / T 40) 1 hex key set with ball ends, 9-part (AF 1.5 / 2 / 2.5 / 3 / 4 / 5 / 6 / 8 / 10 mm) 1 LED torch, length 160 mm, light output 120 lm, 3x AAA batteries 1 side cutter, length 160 mm, 60 HRC chrome, with 2-component grips 1 universal pliers, DIN ISO 5746, length 180 mm, chrome, with 2-component grips 1 water pump pliers made of air-hardened chromium-vanadium steel, DIN ISO 8976, length 240 mm 1 masonry chisel made of air-hardened chromium-vanadium steel, length 300 mm, shank 23 x 13 mm 1 craft knife, width 18 mm, with demolition blade, automatic locking 1 cutter blade, width 18 mm, thickness 0.5 mm, iron-hardened 1 cross peen hammer 500 g, hickory handle, handle L 320 mm, DIN 1041 1 centre punch made of polished and tempered air-hardened chromium-vanadium steel, length 150 mm 1 flat file, length 200 mm, 2nd cut 1 TECWERK L-BOXX®

Tool bag universal 27-part Equipped TECWERK

Equipped with high-quality industrial/trade tools · Comprising: 1 set of hex keys, 9-part, hexagonal with ball head, AF 1.5–10 mm 1 screwdriver set 6-part (slot/PH): 1 screwdriver each for slotted head screws in 3.5 x 100 / 4.5 x 125 / 5.5 x 125 / 6.5 x 150 mm 1 screwdriver for screws with cross-head (PH), size 1 x 80 / 2 x 100 mm 1 universal pliers DIN ISO 5746 L 180 mm 1 side cutter L 160 mm 1 craft knife, width 18 mm with brake wheel 1 water pump pliers in Chromium-vanadium steel, DIN/ISO8976, L 240 mm 1 cross peen hammer 500 g, with Hickory handle 1 pocket retracting tape measure, length 5 m, width 19 mm, yellow 1 aluminium spirit level L 30 cm 1 pocket calliper gauge DIN862, 150 mm 1 wooden folding rule, length 2 m, white 1 safety goggles, daylight basic, PC lenses 1 pair of gloves, size 10 Flex nylon knit 1 tool bag W 400 x D 250 x H 200 mm, nylon

Tool case 47-part in plastic case 4-24 mm TECWERK

12.5 mm (1/2″) square drive · Equipped with high-quality industrial/trade tools Contents: 1 lever-action reversible ratchet (2-component handle, socket-locking function with push-button release, 36 teeth, 10° backswing angle) 1 hexagonal socket bit, 12.5 mm (1/2″) square drive each in AF 8 / 10 / 11 / 12 / 13 / 14 / 15 / 16 / 17 / 18 / 19 / 21 / 22 / 24 mm 1 combination spanner each in AF 6 / 7 / 8 / 9 / 10 / 11 / 12 / 13 / 14 / 15 / 16 / 17 / 18 / 19 mm 1 universal pliers, 180 mm 1 water pump pliers, 240 mm 1 screwdriver each for slotted head screws in 3.0 / 5.5 / 8.0 mm 1 screwdriver each for cross-head (PH) screws in sizes 1 / 2 1 voltage tester, 125–250 V AC 1 hexagon pin spanner set (8-part) for screws with hexagon socket profile in 1.5–8 mm 1 pin spanner set (8-part) for screws with Internal TORX® profile in sizes T 9–T 40 1 cross peen hammer, 300 g 1 universal joint 1 of each extension size 125 / 250 mm 1 sliding 12.5 mm (1/2″) square drive 1 sparking plug socket each in 16 / 18 / 21 mm

Tool module TECWERK

(1/3 module) with pliers for locking rings (inner and outer locking rings) · Straight jaws · Polished head · DIN 5256 C/DIN 5254 A

Tool module TECWERK

(2/3 module) with double open-end spanners · Chromium-vanadium steel · 15° jaw position · DIN3110/ISO3318/ISO1085/ISO10102

Tool module TECWERK

(1/3 module)