TECWERK
Convincing quality and product variety!

Power side cutter polished multi-component handles TECWERK

20 % less force required compared to conventional side cutters · Cutters additionally induction-hardened, cutting edge hardness approx. 64 HRC · Special tool steel, oil-hardened and tempered Polished head

Power socket bit set 35-part 1/2 inch long, hexagon TECWERK

12.5 mm (1/2″) square drive · Made of chromium-molybdenum steel · Black burnished surface · For the toughest conditions on electrical and/or compressed air impact screwdrivers

Power wrench set 40-part long, slot/PH/hex socket/XZN/T TECWERK

10 mm (3/8″) and 12.5 mm (1/2″) square drive For screws with hexagon socket, XZN and internal TORX® profile · Made of S2 steel (adapter* made of chromium-vanadium steel) For use with hand tools, electric screwdrivers and impact screwdrivers Contents: 1 bit each for slotted head screws in sizes 8 / 10 mm** 1 bit each for cross-head (PH) screws in sizes 2 / 3 mm** 1 bit each for screws with hexagon socket profile in sizes 4 / 5 / 6 / 7 / 8 / 10 / 12 mm** 1 bit each for screws with hexagon socket profile in sizes 6 / 8 / 10 mm*** 1 bit each for screws with triple-square (XZN) profile in sizes 5 / 6 / 8 / 10 / 12 mm** 1 bit each for screws with triple-square (XZN) profile in sizes 6 / 8 / 10 / 12 mm*** 1 bit each for screws with internal TORX® profile in sizes T 20 / T 25 / T 30 / T 40 / T 45 / T 50 / T 55 / T 60** 1 bit each for screws with internal TORX® profile in sizes T 20 / T 25 / T 30 / T 40 / T 45 / T 50 / T 55 / T 60*** 1 adapter* each for 12.5 mm (1/2″) and 10 mm (3/8″) square drive * Adapter for hand tools only ** Bit length 30 mm *** Bit length 75 mm

Precision bevel TECWERK

(Bevel) · Made of steel · Galvanised · Raised edges and flat surfaces smoothed · With screw hinge · The two moveable legs can be set to any angle and fixed by means of a wing nut.

Precision engineer's bit set 29-part with interchangeable bits in plastic case TECWERK

Handle with magnetic bit holder and rotating head · Complete with 28 micro bits Contents: 1 handle with: 1 micro bit each for slotted head screws in sizes 1.5 / 2.0 / 2.5 / 3.0 mm 1 micro bit each for cross-head (PH) screws in sizes 00 / 0 / 1 / 2 1 micro bit each for cross-head (PZ) screws in sizes 0 / 1 1 micro bit (with bore) each for screws with TORX® profile (incl. locking pin) in sizes T 4 / 5 / 6 / 7 / 8 / 9 / 10 / 15 1 micro bit each for screws with hexagon socket profile in sizes 0.9 / 1.3 / 1.5 / 2.0 / 2.5 / 3.0 mm 1 micro bit each for screws with TRI-WING® profile in sizes 1.5 / 2.0 mm 1 micro bit each for 5lobe profile in sizes 1 / 1.5 mm Also ideal for repairing mobile phones

Precision engineer's screwdriver set 7-part TECWERK

Rotating centring head · Contents 2000 828 141: 1 screwdriver each for slotted head screws in 1.5 / 2.0 / 2.4 / 3.0 mm* 1 screwdriver each for cross-head (PH) screws in sizes 00 / 0 / 1* Contents 2000 828 151: 1 screwdriver each for screws with internal TORX® profile in sizes T 4 / T 5 / T 6 / T 7 / T 8 / T 9 / T 10* * Blade length 50 mm / total length approx. 140 mm

Precision engineer's vice jaw width 75 mm clamping width 45 mm spheroidal cast iron TECWERK

Made of impact-resistant spheroidal cast iron · Jaws induction hardened (52–58 HRC) · Particular benefit: Swivel plate removable using clamp screw, therefore also suited for fixed installation

Precision mitre gauge leg length 300 mm 45 deg and 135 deg angle gauge beechwood TECWERK

With beechwood handle and steel blade