1724 products
Tool holder E1 DIN 69880 suitable for indexable insert drill TECWERK
For indexable insert drill · With straight shank · Shape E1 · For tools for drilling and turning with internal coolant supply
Tool holder E2 DIN 69880 suitable for boring bars TECWERK
For boring bars · With straight shank · Shape E2 · Internal and external coolant supply · No shortening of the boring bar required · Pierced type: 2000 833 671, 2000 833 672, 2000 833 673, 2000 833 674, 2000 833 678, 2000 833 679, 2000 833 680 and 2000 833 681
Tool holder ER E4 DIN 69880 TECWERK
For collet chuck DIN 6499, shape E4 · Internal and external coolant supply Further technical information: · External Ø: · Clamping range:
Tool holder single 9 x 9 mm TECWERK
Single · For perforated wall system 9 x 9 mm
Tool holder suitable for boring bars TECWERK
For boring bars · Slotted type · Shape E2 S · Reduces or prevents vibrations by clasping the boring bar · Also suitable for fully rounded boring bars with V-groove · Holders are pierced in the shank wherever possible · Secured against fall-out in the turret through circlip · Slotted area to 16 mm 4 x D, 20 and 25 mm 3 x D, from 32 mm 2,5 x D · External and internal cooling possible · For pierced shank, length adjustment possible from the side of shank · Type A = pierced Type B = not pierced
Tool holder TECWERK
With ratchet · For right and left-handed operation as well as for rigid use · For clamping taps and reamers with square shank · With two-jaw chuck and sliding T-handle
Tool module TECWERK
(1/3 module) with pliers for locking rings (inner and outer locking rings) · Straight jaws · Polished head · DIN 5256 C/DIN 5254 A
(2/3 module) with double open-end spanners · Chromium-vanadium steel · 15° jaw position · DIN3110/ISO3318/ISO1085/ISO10102
near you for high-quality productsand excellent service!