TECWERK
Convincing quality and product variety!

College tweezers overall length 155 mm curved, nickel-plated TECWERK

Angled · With guide pin · Narrow, serrated tips · Nickel-plated

Collet chuck set TECWERK

In wooden base · Suitable for draw-in collet chuck · Concentricity and repeat accuracy: 5 µm

Collet chuck TECWERK

Type ER-GB · According to DIN 6499 with internal square for thread cutting · Suitable for thread cutting and draw-in collet chucks type ER · Concentricity 15 µm

Collet chuck type ER 11 / 4008 E TECWERK

According to DIN 6499-B · Suitable for collet chucks type ER · Intermediate dimensions are not necessary · The tools are held over the entire clamping length and can also be clamped on the guide chamfer · Concentricity and repeat accuracy: 5 µm Clamping diameter bridging: Nominal size minus 0.5 mm

Collet chuck type ER 16 / 426 E TECWERK

According to DIN 6499-B · Suitable for collet chucks type ER · Intermediate dimensions are not necessary · The tools are held over the entire clamping length and can also be clamped on the guide chamfer · Concentricity and repeatability: 5 µm Clamping diameter bridging: Nominal size minus 1.0 mm Item no. 2000 832 910 = Nominal size minus 0.5 mm

Collet chuck type ER 25 / 430 E TECWERK

According to DIN 6499-B · Suitable for collet chucks type ER · Intermediate dimensions are not necessary · The tools are held over the entire clamping length and can also be clamped on the guide chamfer · Concentricity and repeat accuracy: 5 µm Clamping diameter bridging: Nominal size minus 1.0 mm Item no. 2000 832 923 = Nominal size minus 0.5 mm

Collet chuck type ER 32 / 470 E TECWERK

According to DIN 6499-B · Suitable for collet chucks type ER · Intermediate dimensions are not necessary · The tools are held over the entire clamping length and can also be clamped on the guide chamfer · Concentricity and repeatability: 5 µm Clamping diameter bridging: Nominal size minus 1.0 mm Item no. 2000 832 938 = Nominal size minus 0.5 mm

Collet chuck type ER 40 / 472 E TECWERK

According to DIN 6499-B · Suitable for collet chucks type ER · Intermediate dimensions are not necessary · The tools are held over the entire clamping length and can also be clamped on the guide chamfer · Concentricity and repeat accuracy: 5 µm Clamping diameter bridging: Nominal size minus 1.0 mm Item no. 4000 832 959 = Nominal size minus 0.5 mm