1726 products
Drift punch set 6-part 1-2-3-4-5 + centre punch dm 4 mm metal box TECWERK
DIN 6458 · Chromium-vanadium air-hardened steel · Hardened · Tempered drive head
Drift punch set 6-part 1-2-3-4-5 + centre punch dm 4 mm plastic holder TECWERK
Drift punch TECWERK
DIN 6458 · Chromium-vanadium air-hardened steel · Made of octagonal steel · Polished · Hardened · Tempered drive head
Drill bit holder E1 DIN 69871 AD/B SK40 TECWERK
For indexable insert drill · With steep taper according to DIN 69871 shape AD/B · With central coolant supply and resealable coolant ducts on the collar · For mounting indexable insert drills with straight shank and lateral pulling face according to DIN 1835-B · Bore tolerance H4
Drill chuck adapter DIN 69871A B16 SK40 projecting length 25 mm TECWERK
With steep taper DIN 69871 Shape A · For mounting drill chucks with taper according to DIN 238
Drill chuck adapter SDS plus 1/2 inch-20 with locking screw TECWERK
SDS plus · Also suitable for machines with anti-clockwise operation (supply with internal thread and retaining screw) · Suitable for every drill chuck with 1/2″-20 internal thread · To be used without impact action
Drill groove milling cutter DIN 327 D type N HSS-Co8 TiCN DIN 1835 B no. of cutters 2 short TECWERK
HSS-Co8 · TiCN-coated · DIN 327 D · Type N · Two-flute cutter · Short · Centre cut · Straight shank with pulling face · Right-hand cutting · For milling low- and medium strength materials up to approx. 1000 N/mm² · For milling narrow and form-fitting clearances as well as feather key grooves with greater depth
Drill groove milling cutter DIN 327 type N no. of cutters 3 short TECWERK
HSS-Co8 · DIN 327 · Type N · Three-flute cutter · Short · Centre cut · Straight shank with pulling face · Right-hand cutting · For milling low- and medium strength materials up to approx. 800 N/mm², with uncoated tool and 1,000 N/mm² with coated tool · For milling feather key grooves with greater depth for face and circumferential milling
near you for high-quality productsand excellent service!