TECWERK
Convincing quality and product variety!

High-performance cooling lubricant water-miscible 5 l canister TECWERK

Water-miscible · With effective EP additives · Causes a substantial extension in tool service life and enables machining with high cutting speeds · Long-term stability · Excellent corrosion protection · For a wide range of machining processes · Density/20 °C: 915 kg/m³ (DIN EN ISO 12185) · Viscosity/40 °C: 30–45 mm²/s (DIN EN ISO 3104) · PH value (4–5 %): 9.2 (DIN 51 369) · Cast iron chips test: 0 [1:20] (DIN 51 360/T 2) · Mineral oil content: 62.5 % · Concentration used: Drilling/milling etc.: 1:20 Grinding/sawing etc.: 1:10 Thread cutting: 1:5 to 1:10

High-performance cutting oil 5 l canister TECWERK

Not water-miscible · For high-speed metal chip removal machining processes with non-ferrous metals and soft to hard and tough steels at high cutting speeds and increased cooling/flushing property requirements (reaming, deep drilling, high-speed turning, etc.) · Not copper-corrosive · Good wear protection · Very good heat dissipation and distinct wetting and flushing behaviour generate high surface qualities · Density at +15 °C: 885 kg/m³ · ISO 3675 · Viscosity at +40 °C: 30 mm²/s ISO 3104 · Viscosity at +100 °C: 4.8 mm²/s ISO 3104 · Flash point (COC): >+200 °C ISO 2592 · Corrosive effect on copper 3 h/+100 °C: 1a (degree of corrosion) EN ISO 2160 · Free of zinc, chlorine and silicone

High-performance welding clamp Toggle TECWERK

Fixed bracket made of cold-drawn profile steel · Drop-forged slide · Tempered · Galvanised · Spindle with trapezoidal thread, AF 17 at end · Movable (to 35°) pressure plate and T-handle for severe stressing with clamping of workpieces in steel construction · Metalworking shops · Wood bonding · Mechanical engineering etc. · For clamping forces of 12 kN with 150 mm clamping width

High-pressure adhesive lubricant 500 ml yellowish spray can TECWERK

Extremely adhesive and penetration capable, synthetic lubricant · For lubricating of wire ropes, open gears, roller chains, toothed racks, as well as slideways with high mechanical loading, etc. · For lubrication and servicing in industry, mining, energy, refinery, railways, railway, trucks, defence technology, agricultural machinery, etc. · O-ring / X-ring compatible · Outstanding adhesion prevents throwing · Load bearing capacity (DIN 51350) approx. 1,500 N · High compatibility with many seals and plastics (pretests are recommended) · Silicone, resin and acid-free

High-temperature grease light coloured 400 g cartridge TECWERK

Natural coloured PU lubricant · Extreme temperature stability · Particularly suitable for lubricating rolling and plain bearings, furnaces, drying ovens, conveyor systems, hot-blast fans, special electric motors subjected to high-pressure and temperatures · Temperature range from −30 °C to +160 °C · Labelling: KP 2P-30 / DIN 51 502 · NLGI class 2

High-temperature oil 400 ml spray can TECWERK

Ensures synthetic, clean lubrication with minimum evaporation · Does not tend to drip, vapour-resistant · Temperature-resistant from approx. -40 °C to +250 °C · Recommended for oiling chains, joints, slideways, clamping and drying frames at high and low temperatures · Silicone-free

Holders suitable for feeler gauge stock TECWERK

For feeler gauge stock

Hole cutting shears steel max. 1 mm stainl.st. max. 0.5 mm quality steel, plastic-coated TECWERK

Quality steel · For short, straight and figure cuts (large radii) · Grey sand-blasted head · With open, curved handles · Fully hardened cutting edges · (58 HRC)