1726 products
End mill DIN 844 type NR TECWERK
HSS-Co5 · DIN 844 · Type NR · Multiple cutter · Short · 45° protective chamfer · Centre cut · Relief ground knurl profile · Straight shank with pulling face · Right-hand cutting · For milling low- and medium strength materials up to approx. 800 N/mm², with uncoated tool and 1,000 N/mm² with coated tool
End mill nickel-plated with inner cooling TECWERK
90° · Nickel-plated type · With internal cooling · For indexable insert SOMT 09T304...
90° · Nickel-plated type · With internal cooling · For indexable insert APKT-10
End mill no. of cutters 4 long TECWERK
HSS-Co8 · DIN 844 · Type N · Four-tipped core drill · Long · Centre cut · Straight shank with pulling face · Right-hand cutting · For milling low- and medium strength materials up to approx. 800 N/mm², with uncoated tool and 1200 N/mm² with coated tool
End mill set DIN 6527 dm 1/1.5/2/3/4 mm no. of cutters 3 solid carbide TiSiN 50-part box TECWERK
Solid carbide · Mini-end mill · TiSiN-coated · DIN 6527 K · Type N · Three-flute cutter · Extra-short · With straight shank in accordance with DIN 6535 HA · 45° angle of twist · Right-hand cutting · For universal use for milling in steel, cast iron, non-ferrous metals and more
End mill set DIN 6527 L dm 6/8/10/12/16 mm no. of cutters 4 VHM TiAlN 5-part plastic box TECWERK
Solid carbide · Universal finest grain · TiAlN-coated · DIN 6527 L · Type N/HPC · Four-tipped core drill · Long · 45° protective chamfer · Centre cut · With straight shank in accordance with DIN 6535 HB · Unequal pitch · Right-hand cutting · Neck relief · For low-vibration processing, suitable for roughing and finishing · As a result of newly developed geometry and coating, can be used universally for milling in steel, cast steel, grey cast iron, malleable iron, Cr-Ni steels, non-ferrous metals, aluminium with silicon content and abrasive materials · Contents: 1 pc. each 6.0–8.0–10.0–12.0–16.0 mm
End mill set Werksnorm dm 4/6/8/10/12 mm no. of cutters 4 VHM TiAlN 5-part plastic box TECWERK
Solid carbide · Ultra-fine grain · TiAlN-coated · Factory standard · Type N/HPC · Four-tipped core drill · Extra-short · 45° protective chamfer · Centre cut · With straight shank in accordance with DIN 6535 HB · Unequal pitch · Right-hand cutting · Short, stable type and soft cut (10°) · Suitable for low-vibration processing, roughing, finishing and groove processing in steel up to 45 HRC, stainless steel, grey cast iron, copper, brass and aluminium. Advantages: Thanks to proven HPC geometry with non-uniformity and TiAlN coating, it is universally applicable, for high quality of finish. Contents: 1 pc. each of Ø 4.0 - 6.0 - 8.0 - 10.0 - 12.0 mm In an impact-resistant and break-proof plastic case
End mill TECWERK
Solid carbide · Universal finest grain · TiAlN-coated · Factory standard · Type N · Multiple cutter · Extra long · 45° protective chamfer · With straight shank in accordance with DIN 6535 HB · Unequal pitch · Right-hand cutting · Neck free grinding · For low-vibration processing, suitable for roughing and finishing · As a result of newly developed geometry and coating, can be used universally for milling in steel, cast steel, grey cast iron, malleable cast iron, Cr-Ni steels, non-ferrous metals, aluminium with silicon content, and abrasive materials
near you for high-quality productsand excellent service!