TECWERK
Convincing quality and product variety!

End mill DIN 6527 L VHM TiAlN DIN 6535 HB no. of cutters 4 long TECWERK

Solid carbide · Universal finest grain · TiAlN-coated · DIN 6527 L · Type N/HPC · Four-tipped core drill · Long · 45° protective chamfer · Centre cut · With straight shank in accordance with DIN 6535 HB · Unequal pitch · Right-hand cutting · Neck relief · For low-vibration processing, suitable for roughing and finishing · As a result of newly developed geometry and coating, can be used universally for milling in steel, cast steel, grey cast iron, malleable cast iron, Cr-Ni steels, non-ferrous metals, aluminium with silicon content, and abrasive materials

End mill DIN 844 type HR HSS-Co PM ALCRONA DIN 1835 B no. of cutters 4 long TECWERK

HSS-Co PM · ALCRONA coated · DIN 844 · Type HR · Four-tipped core drill · Long · 45° protective chamfer · Centre cut · Straight shank with pulling face · Right-hand cutting · For milling materials with a strength up to approx. 1400 N/mm² · Improved tool stiffness by conical chip groove base

End mill DIN 844 type HR HSS-Co PM ALCRONA DIN 1835 B no. of cutters 4 short TECWERK

HSS-Co PM · ALCRONA coated · DIN 844 · Type HR · Four-tipped core drill · Short · 45° protective chamfer · Centre cut · Straight shank with pulling face · Right-hand cutting · For milling materials with a strength up to approx. 1400 N/mm² · Improved tool stiffness by conical chip groove base

End mill DIN 844 type HR HSS-Co5 TiCN DIN 1835 B no. of cutters 4 long TECWERK

HSS-Co5 · TiCN-coated · DIN 844 · Type HR · Four-tipped core drill · Long · 45° protective chamfer · Centre cut · Relief ground fine knurl profile · Straight shank with pulling face · Right-hand cutting · For milling materials with a strength up to approx. 1200 N/mm²

End mill DIN 844 type HR no. of cutters 4 short TECWERK

HSS-Co5 · DIN 844 · Type HR · Four-tipped core drill · Short · 45° protective chamfer · Centre cut · Relief ground fine knurl profile · Straight shank with pulling face · Right-hand cutting · For the milling of materials with strength to approx. 800 N/mm² with uncoated tool and 1,200 N/mm² with coated tool

End mill DIN 844 type N HSS-Co PM ALCRONA DIN 1835 B no. of cutters 4 long TECWERK

HSS-Co PM · ALCRONA coated · DIN 844 · Type N · Four-tipped core drill · Long · Centre cut · Straight shank with pulling face · Right-hand cutting · For milling low- and medium strength materials up to approx. 1,000 N/mm² · Vibration reduction by unequally divided cutters · Improved tool stiffness by conical chip groove base

End mill DIN 844 type N HSS-Co PM ALCRONA DIN 1835 B no. of cutters 4 short TECWERK

HSS-Co PM · ALCRONA coated · DIN 844 · Type N · Four-tipped core drill · Short · Centre cut · Straight shank with pulling face · Right-hand cutting · For milling low- and medium strength materials up to approx. 1,000 N/mm² · Vibration reduction by unequally divided cutters · Improved tool stiffness by conical chip groove base

End mill DIN 844 type N no. of cutters 4 short TECWERK

HSS-Co8 · DIN 844 · Type N · Four-tipped core drill · Short · Centre cut · Straight shank with pulling face · Right-hand cutting · For milling low- and medium strength materials up to approx. 800 N/mm², with uncoated tool and 1,000 N/mm² with coated tool