1726 products
Elevator for TECWERK with two-hole fixing rotating 360 deg TECWERK
With gas pressure spring · For the height adjustment of a screwed-on vice · The installed gas pressure spring enables continuous adjustment of the device · Can be rotated 360°, enabling continuous vertical and horizontal adjustment · The column is securely locked after adjustment by a clamping lever · (Supplied without vice)
Empty cassette passend für Spiralbohrer DIN 338 TECWERK
For twist drill DIN 338 with straight shank Plastic case: Impact and shatter resistant · Article no. 2000 861 919: With core hole dimensions 3.3 / 4.2 / 6.8 / 10.2 mm
End cutter overall length 180 mm plastic-coated TECWERK
The type of head allows for optimised movement when tightening the binding knot during reinforced concrete work · Cutters additionally induction-hardened, cutting edge hardness approx. 60 HRC · Special tool steel, oil-hardened and tempered Polished head
End mill DIN 6527 K Typ N solid carbide TiSiN 45 deg HA no. of cutters 3 extra short TECWERK
Solid carbide · Mini-end mill · TiSiN-coated · DIN 6527 K · Type N · Three-flute cutter · Extra-short · With straight shank in accordance with DIN 6535 HA · 45° angle of twist · Right-hand cutting · For universal use for milling in steel, cast iron, non-ferrous metals and more
End mill DIN 6527 K type N/HPC VHM TiAlN DIN 6535 HB no. of cutters 4 short TECWERK
Solid carbide · Universal finest grain · TiAlN-coated · DIN 6527 K · Type N/HPC · Four-tipped core drill · Short · 45° protective chamfer · Centre cut · With straight shank in accordance with DIN 6535 HB · Unequal pitch · Right-hand cutting · Neck free grinding · For low-vibration processing, suitable for roughing and finishing · As a result of newly developed geometry and coating, can be used universally for milling in steel, cast steel, grey cast iron, malleable cast iron, Cr-Ni steels, non-ferrous metals, aluminium with silicon content, and abrasive materials
End mill DIN 6527 L type NF VHM TiAlN 45 deg DIN 6535 HB no. of cutters 4 long TECWERK
With chip cuttings divider and unequal partition · Solid carbide · TiAlN-coated · DIN 6527 L · Type NF · Four-tipped core drill · Long · With straight shank in accordance with DIN 6535 HB · 45° angle of twist · Product advantages: Highest stability of the tool thanks to the special configuration of the cutter geometry, universal application, ideally suited for roughing or finishing with outstanding quality of finish, (multi-layer TiAlN coating) with optimum protection against wear and temperature stability
End mill DIN 6527 L type NR VHM TiAlN DIN 6535 HB no. of cutters 4 long TECWERK
Solid carbide · Universal finest grain · TiAlN-coated · DIN 6527 L · Type NR · Four-tipped core drill · Long · 45° protective chamfer · With straight shank in accordance with DIN 6535 HB · 45° angle of twist · Right-hand cutting · Neck free grinding · Positive clamping angle for higher flexibility of use · Cutting design with special roughing profile · Enables low-vibration processing
End mill DIN 6527 L type W TECWERK
Solid carbide · Special coating · DIN 6527 L · Type W · Multiple cutter · Long · 45° protective chamfer · Centre cut · With straight shank in accordance with DIN 6535 HB · 45° angle of twist (Z.2) · 38/40° angle of twist (Z.3) · Right-hand cutting · Neck free grinding · Suitable for roughing and smoothing aluminium, copper and other non-ferrous metals · The special coating prevents sticking of the cutters · Z.3 with uneven twist pitch for low-vibration operation and high quality of finish
near you for high-quality productsand excellent service!